Home > Not Working > Asterisk 1.8 Hints Not Working

Asterisk 1.8 Hints Not Working

Contents

Depending on the make of IP phone you are using, different states will typically cause the lamp to go on continuously, to flash fast or slow or potentially even to change Register now! If not, please do so and refer to this forum thread.I did it on wednesday, but I still didn't receive any answer Back to top #17 Guest_madigan_* Guest_madigan_* Guests Posted 19 benötige.Ticketsystemmit freundlichen Grüßen Back to top #5 darkbasic darkbasic Advanced Member Members 41 posts Posted 13 December 2011 - 04:35 PM I'm sorry, but I don't speak German...

That notification will take the form of a SIP NOTIFY with PIDF content (RFC3863) containing the presence/state information.Defining HintsFor Asterisk to store and provide state for an extension, you must first The solution would also depend if you are using native Asterisk or a package like Trixbox or FreePBX. Powered by Atlassian Confluence 5.6.6, Team Collaboration Software Printed by Atlassian Confluence 5.6.6, Team Collaboration Software. By using our services, you agree to our use of cookies.Learn moreGot itMy AccountSearchMapsYouTubePlayNewsGmailDriveCalendarGoogle+TranslatePhotosMoreShoppingWalletFinanceDocsBooksBloggerContactsHangoutsEven more from GoogleSign inHidden fieldsBooksbooks.google.com - Design a complete Voice over IP (VoIP) or traditional PBX system http://lists.digium.com/pipermail/asterisk-users/2011-February/259010.html

Asterisk Hint

Adding to this, it seems if I try and run '/var/lib/asterisk/bin/generate_hints.php *80 nocampon' manually, (which is the entry I got out of extensions_additional.conf), the script does not get past the line Displaying caller ID information can be useful to help an agent decide whether to execute a pickup on an incoming call. You can also think about s as a place to place part of the dialplan that you don't want callers to get back to unless they have passed through other functions. Set the type as BLF and set the number (or value) to match the tag number used in the hint - 6123 in the examples above.

More... You specify a hint like “exten => 6600,hint,park:[email protected]” in your diaplan and then subscribe to the extension, in this case 6600. I have also tried adding a new user and device, all to no avail. Asterisk Dynamic Hints The voicemail is enabled.

Remember these special hint directives are used at load-time and not during run-time, so there is no need for a priority.Multiple devices can be mapped to an extension by providing an Show mickecarlsson added a comment - 19/Apr/11 4:49 AM And the phones you are using are of what brand and model? This is quite similar to app_devstate as part of the bristuff patches.At this little web page a small PHP utility is available that allows to transfer BLF/hint presence information across several http://www.asteriskdocs.org/en/3rd_Edition/asterisk-book-html-chunk/asterisk-DeviceStates-SECT-1.html More...

That used to be the case, but this option has been replaced by the callcounter option for that purpose. Freepbx Hints This bestselling guide makes it easy, with a detailed roadmap that shows you how to install and configure this open source software, whether you’re upgrading your existing phone system or starting pigsfoot 2014-04-24 12:15:13 UTC #3 Hi lgetz, thanks for the feedback. Last qualify: 130 == Extension Changed 152[blf] new state Unavailable for Notify User 154 [Dec 13 21:11:08] NOTICE[9988]: chan_sip.c:20196 handle_response_peerpoke: Peer '152' is now Reachable. (528ms / 2000ms) == Extension Changed

Asterisk Extension State

In the meanwhile Russel Bryant of Digium is looking at a similar, native feature for Asterisk 1.6 (or 1.8) via res_ais using AISNew in Asterisk 1.4Deny subscriptionsIf you don’t want you http://issues.freepbx.org/browse/FREEPBX-5077 Username Forum Password I've forgotten my password Remember me This is not recommended for shared computers Sign in anonymously Don't add me to the active users list Privacy Policy Cookies help Asterisk Hint The first step is to make sure Asterisk supports custom device states. Asterisk Blf Not Working However it sends notifications when the phone goes UNREACHABLE: [Dec 13 21:10:06] NOTICE[9988]: chan_sip.c:25533 sip_poke_noanswer: Peer '152' is now UNREACHABLE!

The phone will send a SUBSCRIBE request to Asterisk. For example useful to play a notification with Playback(). What could be causing this to occur. You’ll quickly gain working knowledge to build a simple yet inclusive system.Integrate Asterisk with analog, VoIP, and digital telephony systemsBuild an interactive dialplan, using best practices for more advanced featuresDelve into Asterisk Device State

Unfortunately the BLF does not light. However, when communicating the state of the channel to an external device, such as a receptionist console, you cannot use the Asterisk internal channel names, but must use an externally identifiable In other words, custom device states (and any other device state) can only be seen by using a hint in the dialplan. Hints are explained in more detail in my article here. When used DND is enabled / disabled and the BLF light goes Red.

h: Hangup. Asterisk Custom Hints It only has an effect on subscriptions that use the dialog-info event package. The states available are: UNKNOWN, NOT_INUSE, INUSE, BUSY, INVALID, UNAVAILABLE, RINGING, RINGINUSE, ONHOLD For example, to assign the INUSE value to a custom device called OnLeave: exten => _X.,n,Set(DEVICE_STATE(Custom:OnLeave)=INUSE) Linking a

t: Timeout.

See the States and Presence section for a diagram showing the relationship of all the various states.Asterisk's SIP channel drivers provide facilities to allow SIP presence subscriptions (RFC3856) to extensions with The manufacturers of modern IP phones use BLF to describe the option that is available on programmable keys to make them subscribe (via SIP) to monitor the status of other extensions pigsfoot 2014-04-24 12:55:32 UTC #4 Aastra handsets - programmed a button as BFL with value of "*76{$username.line.1}" This uses *76 ( DND Toggle On/Off) along with the extension number line one Asterisk Check If Extension Busy disconnected), or does it also show "busy"?

In Asterisk 1.4, you can add “limitonpeers=yes” so that the call limit and counters always will apply on the peer part of a friend. Hope this helps. However, for reasons that should become apparent as you read on, your choice for this number may be influenced by your wish to not only activate a lamp on your IP Get a free login here: Register Thanks! - Find us on Google+ Page Changes | Comments Featured - Get a Free VoIP Quote Cut Business Phone Costs & Save Money!

Second: fkey2!: BLF Can you see in the Sip-trace an entry like this in the NOTIFY Message:

confirmed Regards The Voicemail Admin shows the mailbox as (default)(unactivated). This option is set to yes by default. Is there a way for doing that simplier?

When I leave a message in the mailbox I get the email and the message attachment. limitonpeers must be set to "yes" - this is the most likely culprit since it's missing from the 1.4 default config filesNote: Up to and including Asterisk 1.4 Local channels do Asterisk can support different SIP Domains and these can be used as part of a security policy which just might be behind your problems, but it depends if you are using This problem does not seem to be occurring on a new install of FreePBX 2.9 and Asterisk 1.8 which I have on another machine AttachmentsActivity All Comments Work Log History Activity

Think of a non DID phone line, call comes in, and we may only know that the line is ringing and nothing else. It is perfectly acceptable for more than one IP phone to subscribe to the same hint at the same time. In Asterisk 1.4, you can add “limitonpeers=yes” so that the call limit and counters always will apply on the peer part of a friend. You can search for installed functions using a CLI command.

It currently supports distributed device state and distributed Voicemail MWI (Message Waiting Indication). It would be simpler if your SIP trunk never handled more than one call at a time. Ads by Google: Get smart with the Thesis WordPress Theme from DIYthemes. If you press the button on a BLF programmed key, it will place a call to the number that you assigned to the key.

For more information on setting this up, see doc/distributed_devstate.txt.New in Asterisk 1.8Event thogh this is a little off-topic it is still related: Distributed device state using XMPP and PubSubexten => 12345,hint,confbridge:MyConfName This bestselling guide makes it easy, with a detailed roadmap that shows you how to install and configure this open source software, whether you’re upgrading your...https://books.google.com/books/about/Asterisk_The_Definitive_Guide.html?id=glJUa3f3rd4C&utm_source=gb-gplus-shareAsterisk: The Definitive GuideMy libraryHelpAdvanced Book Any ideas??? It appears, however, that the dynamic naming of CAPI channels that includes the called number makes monitoring of a CAPI line for outgoing calls practically impossible - at least for now.Useful